Crude Oil Specifications
Density @ 15 C g/ml 0.8089 IP 365/D4052
Specific Gravity @ 60 F 0.8093 Calculation
API Gravity @ 60F 43.35 Calculation
Characterization Factor ›12.5 Calculation
Total Sulpher 0.06 IP 336/D4294
Mercaptan Sulphur ppm wt. 44 IP 342Mod/D3227Mod
Total Nitrogen %wt 0.0142 IP 379Mod/D4629Mod
Pour point C(F) ÷39 (÷102) IP15/D97
Viscosity @ 122F, cSI 10.89 IP 71/D445
Viscosity @ 100F, cSI 25* D341
Vanadium ppm wt. 0.4 IP 377 Mod
Nickel ppm wt. 0.5 IP 377 Mod
Sodium ppm wt. 19.6 IP 377 Mod
Calcium ppm wt. 2.9 IP 377 Mod
Potassium ppm wt. 0.3 IP 377 Mod
Conrad son Carbon % wt. 0.4 IP 13/ D189
Asphaltenes % wt. 0.09 IP 143
n-Heptane insolubles %wt 9.2 D893
Reid Vapour Pressure KPa (psi) 5 ( 0.7 ) IP 69/D323
Flash Point C ( F ) below – 20 IP 170
( below – 4 )
Hydrogen Sulphide ppm wt. < 1 IP PM – BJ
Neutralisation Number, mg KOH/g 0.08 IP 177/D664
Bottom, Sediment and Water % vol. 0.10 IP 359/D4007
Ash content % wt. < 0.01 IP 4/D482
Salt ( as NaCl ) mg/liter ( ibs/1000bbls) 71.9 ( 25 ) D3230
Light Hydrocarbons % wt. ( % vol ) IP 344
Methane Nil ( Nil )
Ethane Nil ( Nil )
Propane 0.02 ( 0.03 )
Iso-Butane 0.04 ( 0.06 )
n-Butane 0.14 ( 0.19 )
Iso-pentane 0.29 ( 38 )
n-pentane 0.51 ( 0.06 )
cyclo-pentane 0.03 ( 0.03)
GUARANTEED SPECIFICATIONS FOR
“Russian MAZUT100- GOST 10585/75 Oil”
COMPONENTS | RESULTS |
Ash content, not more % | 0,14 |
Mass fraction of suplhur, not more % -low – suplhur –n residual –oil |
0,5 |
Temperature of the flash, not less ºC – In the closed crucible – In the open crucible ºC 110 min |
110 min |
The temperature of solidification, not higher ºC | 25 |
Kinematics viscosity | 118 max |
Water content | 0.5% |
Mechanical impurities | Lower than 0.1% |
Acidity | Lower than 5 mg KOH/ 100ml |
Alkalinity | Nil |
Gross Calorific Value Kcal/kg / KJ/kg | Min9700/41300 |
Density at 15.0 ºC Kg/l | 0.8900-0.9200 |
Hydrogen Sulfide Content (H2S) pom | 0.5 max |
Carbon Residual | Lower than 7% |
Vanadium (V) ppm | 23 |
Aluminium (Al) ppm | 5 |
Silikon (Si) ppm | 12 |
Nickel (Ni) ppm | 29 |
Asphaltenes m/m | 3.6% |
Destilation @4 mm Hg | |
Extracted to 760 mm Hg | |
Initial Boiling Point ºC | 216 |
5% recovered ºC | 259 |
10% recovered ºC | 310 |
20% recovered ºC | 358 |
30% recovered ºC | 445 |
40% recovered ºC | 502 |
50% recovered ºC | 534 |
60% recovered ºC | 538 |
75% recovered ºC | 545 |
80% recovered ºC | - |
90% recovered ºC | - |
Final Boiling point ºC | 550 |
Percent Recovered vol | 78% |
Residu vol | 22% |
Total Nitrogen m/m | 0.192% |
Sodium (Na) ppm | 15 |